Displacement
125CC
Maximum power
6.0KW/7500RPM
Fuel tank capacity
5L
| DIMENSIONS | |||
| Overall Length*Width*Height | (mm) | 1840 x 690 x 1150 | |
| Wheel Base | (mm) | 1,250 | |
| Seat Height | (mm) | 725 | |
| Ground Clearance | (mm) | 120 | |
| Curb Weight | (kg) | 107 | |
| Max. Capacity | (persons) | 2 | |
| FRAME | |||
| Type | Underbone / Steel | ||
| Front Suspension / Travel | (mm) | Telescopic | 83 |
| Rear Suspension / Travel | (mm) | Unit Swing | 55 |
| Front Tyre / Type | 90/90-12 | Tubeless | |
| Rear Tyre / Type | 3.5-10 | Tubeless | |
| Front Brake | (mm) | Hydraulic Disk | Ø 190 |
| Rear Brake | (mm) | Hydraulic Disk | Ø 190 |
| Fuel Capacity | (L) | 5 | |
| ENGINE | |||
| Type | 4-Stroke | Air-Cooled | |
| Cylinder Arrangement | Single Cylinder | ||
| Bore × Stroke | (mm) | 52.4 x 57.8 mm | |
| Displacement | (cm3) | 125 | |
| Compression Ratio | 9.0：1 | ||
| Valve Train | SOHC | ||
| Maximum Horsepower | (kW / rpm) | 6.0 / 7,500 | |
| Maximum Torque | (Nm / rpm) | 8.4 / 6,500 | |
| Fuel System | EFI | ||
| Lubrication System | Forced and Splash | ||
| DRIVE | |||
| Clutch | Dry Centrifugal | ||
| Transmission | Belt | ||
| Gear Shift Pattern | CVT | ||
| ELECTRICAL | |||
| Ignition System | TCI | ||
| Starting System | Kick/Electric | ||
Zhejiang QJmotor Co., Ltd. is located in Wenling City,
Zhejiang
Province.Its products cover a full range of motorcycles ranging from 110cc
ordinary scooters to 1130cc high-end large-displacement racing cars. For more than 30 years, the company has always pursued the
development strategy of cutting-edge technology, sophisticated equipment, high-end products
and international market. The company has become one of the few companies in the
domestic motorcycle industry that can manufacture high-end large-displacement motorcycles.
Under the strategic guidance of the Geely Group, the company
formulated a five-year strategic plan to build a “ten billion Qianjiang”. While continuing
to strengthen the main business of motorcycles, the company is focusing on the research and
development and manufacturing of key components of new energy vehicles.
We will contact you within 24 hours.
